| |
|
Обновленно: 27.03.2010
|
|
|
|
|
|
The MCP2200
Universal Serial Bus (USB)
• Supports full-speed USB (12 Mb/s)
• Implements USB protocol composite device CDC
device for communications, configuration and I/O
control
• 128 byte buffer to handle data throughput at any
UART baud rate:
- 64byte transmit
- 64 byte receive
• Fully configurable VID and PID assignments, and
string descriptors
• Bus powered or self-powered
• USB 2.0 Compliant (certification #: TBD)
USB Driver and Software Support
• Uses standard Microsoft® Windows® drivers for
Virtual Com Port (VCP):
- Windows XP(SP2 and later)/Vista/7
• Configuration utility for initial configuration
Universal Asynchronous Receiver/Transmitter
(UART)
• Responds to SET LINE CODING commands to
dynamically change baud rates
• Supports baud rates: 300-1000k
• Hardware flow control
• UART signal polarity option
General Purpose Input/Output (GPIO) Pins
• Eight (8) general purpose I/O pins
EEPROM
• 256 bytes of user EEPROM
Other
• USB activity LED outputs (TxLED and RxLED)
• SSPND output pin
• USBCFG output pin (indicates if requested
current is allowed)
• Operating voltage: 3.0-5.5V
• Oscillator input: 12 MHz
• ESD protection > 4 kV HBM
• Industrial (I) Operating Temperature: -40°C to
+85°C
|
|
|
